由于气候、场地、生产量等原因使得化粪池模具的需求量也稳增不减,一些钢模具生产商也笑开了怀,但是钢模具生产商只知道按照客户的订单制作而不知道加强创新,虽然短时间是会满足化粪池生产商的需求,但是时间一长问题就会种种而至,如花纹品种太少、使用时间长漏浆等等原因。 Due to causes such as climate, site, production septic tank mould is steadily growing demand, some steel mold maker also laugh opened my arms, but steel mold manufacturers only know that according to the customer's order and strengthen innovation, although a short time is can meet the demand of the septic tank manufacturers, but over time the problem will a variety of, such as decorative pattern varieties is too little, with long time leak slurry, etc. 　　优质化粪池模具乃用钣金钢板制成,虽然使用寿命长,善于野外生产,而且增加脱模次数。而好的塑料模具由聚丙烯制成,较之钢模具使用寿命大大降低,脱模也需谨慎。现代社会众人越来越注重美观而实用的东西,先是美观后是实用,对于模具也不例外,钢模具虽然比塑料模具耐用,但是其花纹、样式却没有塑料模具那么种类繁多。这也是导致化粪池模具不能独领风骚的直接原因。 The high quality septic tank moulds are made of sheet metal plate, which is good for field production, although it is long life, and it increases the number of molds. The good plastic mold is made from polypropylene, which is much less than the life of steel mould. Modern society, people increasingly pay attention to the things of beautiful and practical, beautiful after is practical, for the mould is not exceptional also, steel mold, though more durable than plastic mold, but the pattern, style, but not as various plastic mold. This is the direct cause of the septic tank mould. 　　水泥化粪池模具在生产中有一些使用注意事项要提醒大家注意,首先震动方式应该采用外部震动成型,以免损伤模具内壁造成粘模具情况发生,其次在化粪池生产过程中在模具表面脱模剂的使用以机油为合适,造价低,脱模块,另外塑料模具应该避免风吹日晒以免加快模具的氧化速度造成使用次数下降。 Cement septic tank mould in production have some use notes to remind you note that the first vibration mode should use external vibration molding, so as not to damage the mould wall caused by sticky mold, secondly in septic tank process on the surface mould release agent used in oil is more appropriate, low cost, demoulding, also protect against the plastic mold should be avoided so as not to speed up the mold oxidation rate decreased frequency of use.