化粪池修建在路边,要充分考虑化粪池盖的沉重能力,车辆和重型设备不应该超过化粪池化粪池要完全密封,掺用引气剂或减水剂.掺用引气剂对提高抗渗、抗冻等性能有良好的作用,并应焊接.密封不严会有臭味也不利于化粪池的发酵和化粪.同时如果密封不严会导致化粪池四周的泥沙掉到化粪池,时间一长影响化粪池的正常工作.传统的化粪池主要为砖混结构,也有钢筋砼结构的,制作工艺都比较简单,没有什么技术含量,容易漏、发生堵塞,处理效率低而且不好,不但没有起到保护环境的处理,反而给污水处理带来了负担.施工程序复杂,工期长,不能满足环保部门及建筑方的要求,所以,市场期待一种更适合更完美的产品,来代替传统的工艺.就这样的期待中,新一代组合式化粪池模具诞生了.

The septic tank built on the side of the road, to fully consider the heavy capacity of septic tank cover, vehicles and heavy equipment should not exceed the septic septic tank should be completely sealed, mixed with air entraining agent or reducing agent. Mixed with air entraining agent to improve the anti permeability and anti freeze properties such as good effect, and shall not seal welding. Yan will smell is not conducive to septic tank fermentation and septic. At the same time if the sealing will lead to septic tanks around the sediment fell into the septic tank, a long time working. The traditional septic septic tank mainly for the masonry structure, has the structure of reinforced concrete, preparation process is simple what, no technical content, easy leakage, blockage, low processing efficiency and is not good, not only to protect the environment of the processing, but to the sewage treatment burden. The construction procedure is complex, long time limit, can not meet the environmental protection departments and the construction request, So, the market is looking for a more perfect product to replace the traditional process. In this expectation, a new generation of septic tank molds are born.