| 化粪池钢模具 |
| 添加时间：2018/5/10 15:15:51 浏览次数： |
| 化粪池钢模具 Steel mould for septic tank 化粪池钢模具小区建设中必不可少的水泥预制品生产模具，化粪池主要用于居民废水处理，粪便环保处理使用，多个化粪池组合在一起可以处理大量的生活废水，减轻了排水设备下水井的压力，粪便，废水等经过化粪池处理后，水质清澈可以直接排入下水道，当累积到一定程度后直接清理化粪池内杂物就可以了，以前化粪池多采用砖砌成型，容易渗漏，生产施工不变，新型化粪池钢模具采用混凝土浇筑成型，不渗漏，安装方便快捷是新型的水泥制品。常用的化粪池模具都是三节加上一个底，这是一套，采用5-10mm的钢板制作而成，重量在2吨左右，可组装拆卸，价格在19000-21000之间。 In the construction of the septic tank steel mold District, the production mould of cement preproduct is essential. The septic tank is mainly used for the treatment of resident waste water, the environmental treatment of feces is used, and many septic tanks can be combined to deal with a large number of living waste water, and the pressure of the water well under the drainage equipment is relieved. The excrement and waste water are treated after the septic tank treatment. The water quality is clear and can be directly discharged into the sewer. When a certain degree is accumulated, the debris in the septic tank can be cleaned directly. The former septic tanks are mostly brick forming, easy to leak, and the production construction is constant. The new septic tank steel mold is formed by concrete pouring, no leakage and convenient and quick installation of the cement system. Goods. The commonly used septic tank molds are three sections plus a bottom. This is a set of steel plates made of 5-10mm, with a weight of about 2 tons, assembled and disassembled, with a price of 19000-21000. 化粪池钢模具包括:上模及下模,所述上模的四周均设有第一法兰边,所述下模的四周均设有第二法兰边,所述第一法兰边与第二法兰边上均开设有数个第一螺孔,所述上模与下模合在一起形成圆柱体,中间形成圆柱体模腔,所述上模与下模的外壁均向外凸设有数个凸肋,所述凸肋内设有与模腔相贯通的槽道,至少一个槽道内安装有隔板,所述隔板的上方设有切面,所述切面与上模之间设有间隙从而形成通道,所述隔板与槽道的槽壁之间形成有间隙,所述凸肋开设有数个第二螺孔,所述第二螺孔内安装有固持件从而将隔板与凸肋固持在一起。 The steel molds of the septic tank include: the upper die and the lower die. The first flange is arranged on the fourth week of the upper die. The second methods of the blue edge are arranged on the four weeks of the lower die. The first flange side and the second flange are provided with a number of first screw holes. The outer wall of the lower die is provided with a number of convex ribs, and the convex rib is provided with a groove through the cavity. At least one slot is installed with a partition. The upper part of the partition is provided with a cutting surface, and a gap is formed between the cutting surface and the upper die to form a channel, and the gap is formed between the partition board and the groove wall of the groove. The convex rib is opened and provided. A plurality of second screw holes are arranged in the second holes, so that the clapboard is fixed with the convex ribs. |
| 上一页 化粪池钢模具 |
| 下一页 大型的化粪池模具介绍主要是不仅仅支持着小区 |
Copyright © 技术支持：遨游网络