| 环保设备|玻璃钢化粪池 |
| 添加时间：2018/9/1 15:07:49 浏览次数： |
| 工作原理： Working principle: 原理是利用沉淀和厌氧发酵，去除生活污水中悬浮性有机物的处理设施，属于初级的过渡性生活处理构筑物。 Principle is the use of sedimentation and anaerobic fermentation, removal of suspended organic matter in domestic sewage treatment facilities, belonging to the primary transitional living treatment structures. 生活污水中含有大量粪便、纸屑、病原虫、悬浮物固体浓度为100~350mg/L，有机物浓度为BOD5在100~400mg/L之间，其中悬浮性的有机物浓度BOD5为50~200mg/L。 Domestic sewage contains a large number of feces, paper scraps, pathogens, suspended solids concentration of 100 ~ 350 mg / L, organic concentration of BOD5 in 100 ~ 400 mg / L, of which suspended organic concentration of BOD5 is 50 ~ 200 mg / L. 污水进入化粪池经过12~24h的沉淀，可去除50%~60%的悬浮物。沉淀下来的污泥经过3个月以上的厌氧消化，使污泥中的有机物分解成稳定的无机物，易腐败的生活污泥转化为稳定的熟污泥，改变了污泥的结构，降低了污泥的含水率。定期将污泥清掏外运，填埋或用作肥料。 When sewage enters septic tanks through 12~24h precipitation, the suspended solids of 50%~60% can be removed. After three months of anaerobic digestion, the organic matter in the sludge is decomposed into stable inorganic matter, and the perishable domestic sludge is transformed into stable mature sludge, which changes the structure of the sludge and reduces the water content of the sludge. The sludge is regularly transported out for landfill or used as fertilizer. 优点： Advantage: 采用整体模具缠绕设备生产，弥补了传统手糊玻璃钢化粪池厚薄不均匀、制造粗糙等不足，对比传统化粪池产品，玻璃钢化粪池具有耐腐蚀、不渗漏、质量轻、强度高、韧性好等优点。 The integral mold winding equipment is used to make up for the shortcomings of traditional hand-pasted FRP septic tanks, such as uneven thickness and rough manufacturing. Compared with traditional septic tanks, FRP septic tanks have the advantages of corrosion resistance, non-leakage, light weight, high strength and good toughness. |
| 上一页 组合式化粪池钢模具的特点 |
| 下一页 化粪池模具的应用对环境有何影响 |
Copyright © 技术支持：遨游网络