| 化粪池模具的结构外形设计有何讲究 |
| 添加时间：2018/10/13 17:14:42 浏览次数： |
| 化粪池模具的结构说明,外形一般为横放的圆筒状,两端封头一般采用力学性能良好的车轮状凹凸面设计,内部设有相通的隔舱板,隔舱板上一般设有立体弹性填料,用来截留更多的厌氧细菌。污水首先由进水口排到第一格,在第一格里比重较大的固体物及寄生虫卵等物沉淀下来,利用池水中的厌氧细菌开始初步的发酵分解,经第一格处理过的污水可分为三层,第三格功能主要起暂时储存沉淀已基本无害的粪液作用,最后,经过再次沉淀的粪液通过排水管流入市政管网。而新型化粪池模具比常见的多了一道发酵腐化的工序,工艺更细化,水质更干净。 The structure of the septic tank mold indicates that the shape of the septic tank mold is generally transverse cylindrical, and the two ends of the head are generally designed with wheel-shaped concave-convex surface with good mechanical properties, and the interior of the septic tank is equipped with interlinked compartment boards, and the compartment boards are generally equipped with three-dimensional elastic fillers to trap more anaerobic bacteria. Sewage is first discharged from the inlet to the first compartment. Solids and parasite eggs with a large proportion in the first compartment are deposited. Anaerobic bacteria in the pond water are used to start the preliminary fermentation and decomposition. Sewage treated in the first compartment can be divided into three layers. After being precipitated, the excrement liquid flows through the drain pipe to the municipal pipe network. The new septic tank mold than the usual one more fermentation and decay process, the process is more refined, the water quality is cleaner. 随着化粪池模具行业的需求量增大,对于一些简单的模具产品,在时间上要求是很紧的,因此新型化粪池模具等产品就得到了广泛利用,这种产品不但可以加快生产进程,而且可以降低人员投入,减少人工成本,质量好而且成本低,生产速度更快。在进行生产时必须是完全脱模,产品不能有遗留在模具内,顶出行程要大于产品的高度,顶出后,产品要能自动的从模具里掉落,或者采用机械手能取出,须保证顶针板在模具闭合前先复位,因此往往需要安装先复位机构,特别是当化粪池模具内有滑块等结构的时候,需要设置复位报警装置,保证模具安全运行。 With the increasing demand of the septic tank mold industry, some simple mold products require very tight time, so the new septic tank mold and other products have been widely used, this product can not only speed up the production process, but also reduce personnel investment, reduce labor costs, good quality and low cost, production speed. The degree is faster. In the production must be completely demoulded, the product can not be left in the mold, ejection stroke to be greater than the height of the product, ejection, the product can automatically fall from the mold, or the use of a manipulator can be removed, must ensure that the ejector plate in the mold closed before the first reset, so often need to install a first reset mechanism, especially when the septic tank. When there are sliders and other structures in the mold, reset alarm devices need to be set up to ensure the safe operation of the die. |
| 上一页 模具、机械加工常用金属材料及其特性（一） |
| 下一页 化粪池模具如何扩展行业发展趋势 |
Copyright © 技术支持：遨游网络