| 玻璃钢化粪池的诞生与发展 |
| 添加时间：2018/12/8 15:47:00 浏览次数： |
| 1、玻璃钢化粪池是怎么诞生的 传统的化粪池主要为砖混结构，也有钢筋砼结构的，但是制作工艺都比较简单，没有什么技术含量，易渗漏、易堵塞，水处理效果也不好，污染周围环境，增加了下游污水处理厂的负担，且施工程序复杂，工期长，不能满足环保部门及建筑方的要求，所以，市场亟待一种更适合更完美的产品。 就这样，玻璃钢化粪池应运而生。玻璃钢化粪池因其原料的特殊性，轻质高强，不腐蚀，无渗漏，水处理效果杰出，施工安装便捷，只需挖坑掩埋即可，弥补了传统化粪池的所有缺点，受到了各级环保、建筑部门的肯定和赞誉。 2、玻璃钢化粪池发展历史 玻璃钢化粪池发展至今大概可分为四个阶段： 第一阶段产品为方型，顶部和底部略小，若是分开就是上下两个梯形。加工时先加工出来两个凹槽状的模型，再把它们合在一起，即成为一个成品。这种产品解决了传统产品不耐腐蚀，易渗漏堵塞的缺点，但是严密性还不够好，抗压性也一般，无法制作大型产品。 第二阶段产品基本为横卧的圆柱体，但顶部和底部还是设计为平面。车轮状凹凸面封头开始使用。因为是筒状模具，这一阶段的产品一般采用对接的方法连接结合。这种产品的抗压性能要比第一阶段的好，但是产品的严密性还可以，而且这种产品的加工程序复杂，不利于工厂化生产。 第三阶段的产品为波纹玻璃钢化粪池。这种两端封头采用力学性能凹凸状面设计， 外形为波纹状卧式圆筒筒体一次成型，独特的环向密集波纹结构设计，抗压、抗冲击强度比方型、圆筒型、球面圆拱型等强度增强数倍，不需要其他任何加固措施即可满足不同情况下使用，是目前综合性能国际领先技术的产品。 1. The traditional septic tank is mainly brick concrete structure and reinforced concrete structure, but the production process is simple, there is no technical content, leakage, easy jam, water treatment effect is not good, pollution surrounding environment, increase the burden of downstream sewage treatment plant, and construction The procedure is complex and the construction period is long, so it can't meet the requirements of environmental protection department and builders. Therefore, the market needs a more perfect and perfect product. In this way, the glass steel septic tank came into being. Because of the particularity of its raw materials, the glass steel septic tank has high strength, high strength, no corrosion and no leakage. The effect of water treatment is outstanding and the construction and installation is convenient. It only needs to be buried and buried. It has made up all the shortcomings of the traditional septic tank, and has been affirmed and praised by the environmental protection and construction departments at all levels. 2, the development of glass and steel septic tank development history of glass and steel septic tank may be divided into four stages: the first phase of the product is square, the top and the bottom slightly small, if separate is the two trapezium. When machining, two groove models are first processed, and then they are combined into a finished product. This product solves the shortcomings of the traditional products, which are not resistant to corrosion and are easy to clog. But the tightness is not good enough, and the compression resistance is general, and the large products can not be made. The second stage product for the horizontal cylinder, but the top and bottom is designed into a plane. The wheel - shaped concave convex head begins to use. Because it is a tubular mold, and the products in this stage usually use the way of docking to connect. The compression performance of this product is better than that in the first stage, but the tightness of the product is still possible, and the processing procedure of this product is complex, which is not conducive to the factory production. The third stage products are corrugated glass and steel septic tanks. The two ends seal head is designed with mechanical properties and concave and convex surfaces. The shape is corrugated horizontal cylindrical barrel, and its unique ring direction dense corrugated structure is designed. The strength of compression, impact strength, cylinder type, spherical arch and so on is multiplied several times. No other reinforcement measures are needed to meet different conditions. Use is the leading technology product of comprehensive performance at present. |
| 上一页 三格化粪池厕所建造方法 |
| 下一页 预制化粪池钢模具特点 |
Copyright © 技术支持：遨游网络