| 化粪池钢模具小区建设中必不可少的水泥预制品生产模具 |
| 添加时间：2021/5/8 14:52:48 浏览次数： |
| 化粪池钢模具小区建设中必不可少的水泥预制品生产模具，化粪池主要用于居民废水处理，粪便环保处理使用，多个化粪池组合在一起可以处理大量的生活废水，减轻了排水设备下水井的压力，粪便，废水等经过化粪池处理后，水质清澈可以直接排入下水道，当累积到一定程度后直接清理化粪池内杂物就可以了，以前化粪池多采用砖砌成型，容易渗漏，生产施工不变，新型化粪池钢模具采用混凝土浇筑成型，不渗漏，安装方便快捷是新型的水泥制品。 Cement prefabricated production mould is indispensable in the construction of steel mould District of septic tank. The septic tank is mainly used for the treatment of residential wastewater and the environmental protection of feces. A large amount of domestic wastewater can be treated by the combination of several septic tanks, which reduces the pressure of drainage equipment into wells, and the treatment of feces and wastewater by septic tank. The water quality is clear and can be discharged directly into the sewer. When accumulating to a certain extent, it can clean up the debris in the septic tank directly. In the past, the septic tank was mostly formed by brick masonry, which is easy to leak, and the production and construction are unchanged. The steel mould of the new type septic tank is formed by concrete pouring, which is not leaking. The installation is convenient and fast. It is a new type of cement production. Product. 常用的化粪池模具都是三节加上一个底，这是一套，采用5-10mm的钢板制作而成，重量在2吨左右，可组装拆卸，价格在19000-21000之间。 Commonly used septic tank moulds are three sections plus a bottom, which is a set of 5-10mm steel plate, weighing about 2 tons, can be assembled and disassembled, the price is between 190000-2100 |
| 上一页 化粪池钢模具包括:上模及下模 |
| 下一页 盖板模具加工制作 |
Copyright © 技术支持：遨游网络